Hello friends, I Akshay, welcome you all to my youtube channel KrushiFly. Today, I will explain how to start a 2 stroke 52 cc brush cutter and what things we should keep in mind before starting the machine This is my brush cutter 2 stroke engine This is the switch. ‘I’ means ON & ‘O’ means OFF If you press these buttons together, machine will start working as nylon trimmer, power weeder etc This is the choke, taking it up and down, increases the fuel ratio in air-fuel mixture. This is the starter, pulling it, will start the engine. This is the fuel tank of 2 stoke engine. Mix 40 ml of 2T oil for every 1 litre of petrol Here are 2 pipes, green and black. There is also a ball. I will tell more about them. All the petrol + oil mixture from fuel tank goes through the black pipe in the engine. And excess petrol, gas or air moves out from the engine through the green pipe in fuel tank. So, before starting 2 stroke engine in the morning, you have to press the ball 10 to 15 times. This helps to remove the air from engine through the green pipe. There should be no bubble or air in the black pipe or your engine won’t start After pressing the ball, the air from black pipe goes into the green pipe. This ensures that the black pipe only contains petrol + oil mixture and no air. IMP: the ball should be always filled with the petrol. If there is no petrol or ball is half filled, then engine will not start Then you will have to go to repair center, replace these 2 pipes Then the petrol mixture can easily fill in the ball. I am pressing the ball to remove the air, to start the engine. after pressing the ball take the choke in upward direction. Switch on the button (pressing towards ‘I’ button). Now I will pull the starter. We have to pull the starter 2 times keeping the choke in upward direction. Our engine will start and then stop. 3rd time, take the choke in downward direction, and then pull the starter. Your machine will start in 1 shot. As you can see, I am pulling starter 2 times, keeping choke in upward direction. engine will start and stop. 3rd time, choke is down, pull the starter. machine starts working as you can see I am switching of the machine (press on ‘O’ button to switch off) and again I will show you see the operation again. Before starting the machine you need to take some precautions In morning, whenever you start the machine, press the ball 10 to 15 times After that you can use the machine whole day without pressing the ball. Whenever you start the machine, keep the choke in upward direction, pull starter 2 times. 3rd time, keep choke in downward direction, pull the starter, machine will start. If its raining, don’t use the machine or your engine will be harmed. Last, for 1 litre petrol use 40 ml 2T oil for 2 stoke brush cutter. I hope you got complete information on how to start your 2 stroke brush cutter. If you like my videos, do subscribe to my channel. Stay tuned on KrushiFly.